老牛影视免费观看电视剧,莫菁,03女孩退款报警原视频

0592-5718315 18859225646
×

Round foam seal
Product specifications, shape, color can be made according to customer requirements. The density can range from 0.5 to 0.85.

Product specifications, shape, color can be made according to customer requirements. The density can range from 0.5 to 0.85.


Features

1. The product density of foam tube can be 0.5 ~ 0.85. Soft and light texture, good resilience, strong tensile force. It has excellent heat resistance to air aging, ozone resistance, insulation, and resistance to fuel oil and lubricating oil. It can work in the air or oil medium at the temperature of -60~+250℃.
2. Strong sealing ability, can effectively prevent small particles and rain.
3. Seal, dust proof, moisture proof, air tight and light shading, vibration isolation, fire prevention
4. Vibration isolation used in electronic equipment and vehicle interior
5. It can be used for punching all kinds of sealing gaskets and gaskets with strict requirements
6, in the wet water or temperature rise, the change is small, even if the silicon dioxide generated by short circuit combustion is still an insulator, which ensures that the electrical equipment continues to work, so it is suitable for the production of wire, cable, wiring.

Performance Parameters

1, with three anti - water, anti - UV function, can be used in the outdoor for a long time.
2. Insulation class: H class.
3, power frequency voltage: greater than or equal to 15KV/mm.
4. Tensile fracture strength: 3.5Mpa.
5. Elongation at break: 480%.
6, tear strength: 12KN/M.
7. Brinell hardness: 35.5 degrees.
8. Relative density: 0.85 oz. 0.5g/cm3.
9, performance test method Typical value Physical performance color: white red yellow gray red black brown orange.

Pressure deflection, psi (kPa) at 25% deflection measured by ASTM D 1056 force.


Compression deformation, maximum % ASTM D 1056 test D<1 at 158oF (70oC) ASTM D 1056 test D< 5 at 212oF (100oC) Tensile strength, psi (kPa)ASTM D 412 45 (310) Elongation, % ASTM D 41280 Flame retardancy and gas release.

Flame retardant UL94 V-0 and HF-1 class Flame Diffusion Index (Ls)ASTM E 162<25 Smoke Density (Ds)ASTM E 662 at 4.0 min test <50 at 1.5 min test <20 Toxic gas emission class SMP-800CPASS.

Hot News
主站蜘蛛池模板: 英德市| 长阳| 横峰县| 海淀区| 岱山县| 陕西省| 新密市| 南昌县| 老河口市| 梓潼县| 奉化市| 扎鲁特旗| 迁安市| 沽源县| 麻栗坡县| 侯马市| 渭南市| 读书| 绥棱县| 荣成市| 屏东市| 温州市| 黎川县| 邢台县| 富阳市| 苍南县| 老河口市| 新乡县| 綦江县| 历史| 漳平市| 龙川县| 福清市| 鹤峰县| 台中市| 洪江市| 金阳县| 花莲市| 苍溪县| 鄄城县| 商河县|