老牛影视免费观看电视剧,莫菁,03女孩退款报警原视频

0592-5718315 18859225646
×

Round foam seal
Product specifications, shape, color can be made according to customer requirements. The density can range from 0.5 to 0.85.

Product specifications, shape, color can be made according to customer requirements. The density can range from 0.5 to 0.85.


Features

1. The product density of foam tube can be 0.5 ~ 0.85. Soft and light texture, good resilience, strong tensile force. It has excellent heat resistance to air aging, ozone resistance, insulation, and resistance to fuel oil and lubricating oil. It can work in the air or oil medium at the temperature of -60~+250℃.
2. Strong sealing ability, can effectively prevent small particles and rain.
3. Seal, dust proof, moisture proof, air tight and light shading, vibration isolation, fire prevention
4. Vibration isolation used in electronic equipment and vehicle interior
5. It can be used for punching all kinds of sealing gaskets and gaskets with strict requirements
6, in the wet water or temperature rise, the change is small, even if the silicon dioxide generated by short circuit combustion is still an insulator, which ensures that the electrical equipment continues to work, so it is suitable for the production of wire, cable, wiring.

Performance Parameters

1, with three anti - water, anti - UV function, can be used in the outdoor for a long time.
2. Insulation class: H class.
3, power frequency voltage: greater than or equal to 15KV/mm.
4. Tensile fracture strength: 3.5Mpa.
5. Elongation at break: 480%.
6, tear strength: 12KN/M.
7. Brinell hardness: 35.5 degrees.
8. Relative density: 0.85 oz. 0.5g/cm3.
9, performance test method Typical value Physical performance color: white red yellow gray red black brown orange.

Pressure deflection, psi (kPa) at 25% deflection measured by ASTM D 1056 force.


Compression deformation, maximum % ASTM D 1056 test D<1 at 158oF (70oC) ASTM D 1056 test D< 5 at 212oF (100oC) Tensile strength, psi (kPa)ASTM D 412 45 (310) Elongation, % ASTM D 41280 Flame retardancy and gas release.

Flame retardant UL94 V-0 and HF-1 class Flame Diffusion Index (Ls)ASTM E 162<25 Smoke Density (Ds)ASTM E 662 at 4.0 min test <50 at 1.5 min test <20 Toxic gas emission class SMP-800CPASS.

Hot News
主站蜘蛛池模板: 宜昌市| 双峰县| 临城县| 临沂市| 东明县| 通许县| 新沂市| 鞍山市| 邵武市| 连州市| 曲阜市| 太仓市| 定结县| 临安市| 昂仁县| 垣曲县| 汶上县| 新晃| 敦化市| 建瓯市| 安远县| 唐山市| 漯河市| 元谋县| 博罗县| 昌江| 澳门| 长海县| 玉屏| 阿城市| 随州市| 刚察县| 苏尼特左旗| 文水县| 陈巴尔虎旗| 宁陕县| 岱山县| 阳春市| 威信县| 拜城县| 姜堰市|